|
PUMP JACKS
Alum-A-Pole Pump Jack System
COMPONENTS:
|
|
|
|
|
Model No. A-101
Weight: 33 lbs.
Posi-grip structural aluminum frame.
Tested to 4,000 lbs.
Saf-T-Crank handle has self-storing and anti-spin features.
3 separate back-up safety systems.
Saf-T-Lock® secures staging and provides anti-theft.
|
Model No. A-103
Weight: 20 lbs.
Telescopes to 27 inches
Saf-T-Lock provides anti-theft and upending securement
|
Alum-A-Brace
|
Alum-A-Joint
|
|
|
|
Model No. A-102
Weight: 7 lbs.
Foldable.
Super strong and ultra fast erection.
Multi-angle swivel permits easy attachment to any roof.
Brace pull-out back-up safety system.
|
Model No. 6AJ3
Weight: 9 lbs.
Used for jointing 2 poles.
. 6 ' sections join Alum-A-Poles.
Increases strength of Alum-A-Poles.
|
|
Alum-A-Pole
|
Alum-A-Scaff
|
|
|
Open hole industrial decking provides non-slip surface.
Square rungs offer substantial stability.
End rungs offer non-overlapping hingeability.
|
Lifetime Warranty.
Industrial rubber permanently mated to structural aluminum .
Lab tested to 5,000 lbs.
Model No.
|
Lenght
|
Weight
|
6AP3
|
6 ft.
|
13 lbs.
|
12AP3
|
12 ft.
|
26 lbs.
|
18AP3
|
18 ft.
|
39 lbs.
|
24AP3
|
24 ft.
|
52 lbs.
|
|
Model No.
|
Lenght
|
Width
|
Weight
|
AP1424
|
24 ft.
|
14 in.
|
109 lbs.
|
AP2024
|
24 ft.
|
20 in.
|
130 lbs.
|
*Note: These are the most commonly used sizes. Please call for availibilty of others.
|
Saf-T-Net Guard Rail
|
End Rail
|
|
|
|
Model No. APNET
22 foot, foldable and durable.
Easy to install.
Net can be stenciled with company name and phone number.
|
Model No. APEPS
Easy to install end rail system.
Slides for infinite positioning.
Eliminates walk-off accidents
|
East To Install
Wood Post Pump Jacks
(Economical & Reliable)
Provides a safe, economical platform to paint, remodel, or put up siding.
Special attention must be given to the proper selection of 2" x 4" lumber used to make up the poles.
Set-up instructions and weight limitations must be followed and observed.
Guard Rails and Toeboards should be used in all cases.
OSHA requires that pump jack scaffold platforms have a plank that is a minimum of 12 inches wide.
The wooden poles must be spaced no more than 10 feet apart and no higher than 30 feet.
|
|
Components:
Pump Jack
|
 |
Workbench Extension
|
|
|
 |
|
Model No. Q2200
Weight: 19 lbs.
Fits two 2" x 4"s nailed together to make a pole. Pump it up with your foot. Crank it down with your hand. One man operation.
|
 |
Model No. Q2202
Weight: 6 lbs.
The workbench attaches to the guard rail holder. It moves automatically with the pump jack.
|
Pump Jack Brace
|
 |
Brace Extension
|
|
|
 |
|
Model No. Q2201
Weight: 6 lbs.
The brace fixes the upright 32" from the building by its round member. It is adjustable both left and right.
|
 |
Model No. Q2212
Weight: 4 lbs.
For an economical brace extension devise, useful when working around wide eaves and other projections. Two clamps on the round arm of the brace.
|
Guard Rail Holder
|
|
|
Model No. Q2203
Weight: 6 lbs.
The guard rail holder attachment holds rail on the inside of the pole. It moves with the bracket and at least two are required.
|
***All products should be used in accordance with all Local, State and Federal / OSHA requirements.
**We carry a full line of parts for all our products.
****DELIVERY AVAILIBLE****
***Please Note***
Due to limitations, all of our products cannot be featured on this site. If you can't find something, PLEASE CALL!
|