|
SCAFFOLDING
Standard Scaffold Frames:
The 5ft wide frames are ideally suited for maintenance and general applications. They are availible in various heghts plus a 6' 4" Walk-thru. They are recommended where the maximum load capacity does not exceed 50 lbs. per square foot uniformly distributed over a 5' x 7' area.
Model No. FLT3
Stud Center: 2' 0"
Wt: 29.5 lbs.
Height: 3'
|
 |
Model No. FLT4
Stud Center: 3' 0"
Wt: 36.5 lbs.
Height: 4'
|
|
|
 |
|
Model No. FLT5
Stud Center: 4' 0"
Wt: 39.5 lbs.
Height: 5'
|
 |
Model No. FLT64
Stud Center: 4' 0"
Wt: 45.5 lbs.
Height: 6' 4"
|
|
|
 |
|
Model No. FWT64 (Walk-thru)
Stud Center: 4' 0"
Wt: 49.5 lbs.
Height: 6' 4"
|
 |
|
|
* All of our frames include factory installed drop locks, coupling pins with 1" collar, and locking pins with retainer.
TUBE SPECIFICATIONS
Outside diameter
|
1.69"
|
Inside diameter
|
1 - 1/2"
|
Wall thickness
|
.095"
|
***All products should be used in accordance with all Local, State and Federal / OSHA requirements.
|
Braces:
All cross braces are fabricated from 1" O.D. galvanized steel tubing with .073"
wall thickness.
* Please note - These are the most commonly used cross braces. Others are availible upon request.
|
Model
No.
|
Span
Between
frames
|
Frame
Stud
Center
|
Weight
|
BP72
|
7 ft.
|
2 ft.
|
11.5 lbs
|
BP73
|
7 ft.
|
3 ft.
|
11.75 lbs
|
BP74
|
7 ft.
|
4 ft.
|
12.25 lbs
|
B102
|
10 ft.
|
2 ft.
|
15.75 lbs
|
B103
|
10 ft.
|
3 ft.
|
16.25 lbs
|
B104
|
10 ft.
|
4 ft.
|
17 lbs
|
|
Guard rail systems:
|
|
Guard Rail Posts:
|
Model No.CGRPF
Corner guard rail post (female)
|
|
Scaffold Accessories:
|
Guard Rails:
Model No.
|
Lenght
|
GR30
|
2' 6"
|
GR4
|
4' 0"
|
GR5
|
5' 0"
|
GR7
|
7' 0"
|
GR10
|
10' 0"
|
|
Casters
Model No. Z203
8 inch
Wt: 13lbs
|
Coupling
Pins
Model# CP
O.D. 1-1/4"
Len: 9"
|
Locking Pin/Hair Pin
Model No. LP-HP
Used to lock frames & accessories together.
|
Toggle Pins
Model No. TP-1
Used to lock frames & accessories together.
|
|
|
|
|
|
Base Plate
Model No. BP1
Wt: 3 lbs.
|
Swivel Base Plate
Model No. BP3
Used for uneven or angled surfaces.
|
Leveling Jack
Model No. LJ1
Wt: 13.5 lbs.
|
Leveling Jack For Casters
Model No. LJ2
Wt: 13.5 lbs.
|
|
|
|
|
|
Side Arms Used to extend work area outward.
Model No. SA21 Lenght: 21.5"
|
|
End Arms Used to extend work area outward.
Model No. EA21 Lenght: 21.5" Wt: 12 lbs.
|
Outrigger
Model No. OR1
Stud Center: 2' 0"
Wt: 16 lbs
Used to provide a wider base to stabilize scaffold.
Note: Bracket Requires a cross brace.
|
|
***All products should be used in accordance with all Local, State and Federal / OSHA requirements.
|
Hoist Arm
Model No. HAA
Capacity: 75 lbs
Wt: 25 lbs
|
|
Hoist Arm Wheel
Model No. GW
12" diameter (sheave)
SWL is 1200 lbs.
Wt: 14.5 lbs
|
|
Light Duty Scaffold Frames:
The 4-foot wide light duty frames are recommended for homeowner maintenance and general applications where the maximum load capacity does not exceed 25 lbs. per square foot uniformly distributed over a 4' x 7' area.
Model No. LD4
Stud Center: 3' 0"
Wt: 21 lbs.
Height: 4'
|
 |
Model No. LD6
Stud Center: 4' 0"
Wt: 30 lbs.
Height: 6'
|
|
|
 |
|
Light Duty Narrow Frames:
The 30" wide light duty frames are suited to indoor/outdoor maintenance where the maximum load capacity does not exceed 25 lbs. per square foot uniformly distributed over a 30" x 7' area.
Model No. LRTFL3
Stud Center: 2' 0"
Wt: 14 lbs.
Height: 3'
|
 |
Model No. LRTFL6
Stud Center: 2' 0" & 4' 0"
Wt: 30 lbs.
Height: 6'
|
|
|
 |
|
TUBE SPECIFICATIONS
Outer Diameter
|
1.25"
|
Inside Diameter
|
1.078"
|
Wall Thickness
|
.086
|
Light Duty Scaffold Accessories:
Casters
Model No. Z073
6 inch
Wt: 8.5 lbs
|
Base Plate
Model No. LBP1
Wt: 1 lbs.
|
Coupling
Pins
Model# LCP
O.D. 15/16"
Len: 9"
|
Locking Pin/Hair Pin
Model No. LLP-HP
Used to lock frames & accessories together.
|
|
|
|
|
|
Light Duty Guard Rail Post
Model No. LGRP
|
Leveling Jack
Model No. LLJ1
Wt: 5 lbs.
|
Leveling Jack For Casters
Model No. LLJ2
Wt: 5 lbs.
|
Outrigger
Model No. OR1
Stud Center: 2' 0"
Wt: 16 lbs
|
|
|
|
|
|
Alum-a-Planks:
Model No.
|
Duty/Sq. Ft.
|
Width
|
Lenght
|
Weight
|
5307-19
|
75 lbs.
|
19-1/16"
|
7 ft.
|
27 lbs.
|
5307-24
|
75 lbs.
|
24"
|
7 ft.
|
32 lbs.
|
5310-19
|
75 lbs.
|
19-1/16"
|
10 ft.
|
47 lbs.
|
5310-24
|
75 lbs.
|
24"
|
10 ft.
|
53 lbs.
|
* Please note - These are the most commonly used planks. Others are availible upon request.
|
Wall Brackets:
Carpenter's Wall Bracket
|
Model No. CWBB
Wt: 11 lbs
|
 |
Bracket Post
Model No. CWBP
Wt: 6 lbs.
|
|
|
 |
|
|
***Note: No more than 2 employees shall occupy any given 8 feet of carpenter's wall bracket at any one time. As recommended, OSHA requires carpenter's wall bracket to have guard rails, mid rails and toeboards. Platform load on any wall bracket should not exceed 500 lbs.
Folding Wall Bracket
Model No. Q2300
Wt: 10 lbs.
|
|
|
***Note: Per OSHA, Folding Wall Brackets that are built over 10 feet in height from the ground must include guard rails, mid rails, and toeboards on all open sides.
***All products should be used in accordance with all Local, State and Federal / OSHA requirements.
**We carry a full line of parts for all our products.
****DELIVERY AVAILIBLE****
***Please Note***
Due to limitations, all of our products cannot be featured on this site. If you can't find something, PLEASE CALL!
|