Search for products
SCAFFOLDING
Standard Scaffold Frames:
The 5ft wide frames are ideally suited for maintenance and general applications. They are
available in various heights plus a 6' 4" Walk-thru. They are recommended where the
maximum load capacity does not exceed 50 lbs. per square foot uniformly distributed over a
5' x 7' area.
* All of our frames include factory
installed drop locks, coupling pins
with 1" collar, and locking pins
with retainer.
TUBE SPECIFICATIONS
Outside
Diameter
1.69"
Inside
Diameter
1 - 1/2"
Wall
Thickness
.095"
***All products should be used in
accordance with all Local, State
and Federal / OSHA requirements.
Braces:
All cross braces are fabricated from 1" O.D. galvanized steel tubing with .073" wall thickness.
Model
No.
A
Span
Between
frames
B
Frame
Stud
Center
C
Hole
to
Hole
Weight
BP72
7ft.
2ft.
87-3/8"
11.50lbs.
BP73
7ft.
3ft.
91-3/8"
11.75lbs.
BP74
7ft.
4ft.
96-3/4"
12.25lbs.
B102
10ft.
2ft.
122-3/8"
15.75lbs.
B103
10ft.
3ft.
125-1/4"
16.25lbs.
B104
10ft.
4ft.
129-1/4"
17.00lbs.
* Please note - These are the most
commonly used cross braces. Others are
available upon request.
Guard rail systems:
Model
No.
Lenght
GR28
28in.
GR4
4ft.
GR5
5ft.
GR7
7ft
GR10
10ft.
Guard Rails:
Guard Rail Posts:
Scaffold Accessories:
Model No. Z203
8 inch
Wt: 13lbs
Casters
Coupling Pin
Locking Pin/Hair Pin
Base Plates
Swivel Base Plates
Leveling Jack
Socket Leveling Jack
Hoist Arm Wheel
Hoist Arm
Toggle Pin
End Arm
Side Arm
Outrigger
***All products should be used in
accordance with all Local, State
and Federal / OSHA requirements.
***All products should be used in
accordance with all Local, State
and Federal / OSHA requirements.
Light Duty Scaffold Frames:
The 4-foot wide light duty frames are recommended for homeowner maintenance and general
applications where the maximum load capacity does not exceed 25 lbs. per square foot
uniformly distributed over a 4' x 7' area.
TUBE SPECIFICATIONS
Outside
Diameter
1.25"
Inside
Diameter
1.078"
Wall
Thickness
.086
***All products should be used in
accordance with all Local, State
and Federal / OSHA requirements.
Light Duty Narrow Frames:
The 30" wide light duty frames are suited to indoor/outdoor maintenance where the maximum
load capacity does not exceed 25 lbs. per square foot uniformly distributed over a 30" x 7' area.
Outside
Diameter
1.25"
Inside
Diameter
1.078"
Wall
Thickness
.086
***All products should be used in
accordance with all Local, State
and Federal / OSHA requirements.
Light Duty Scaffold Accessories:
Model No. Z073
6 inch
Wt: 8.5 lbs
Light Duty Guard
Rail Post
Light Duty Casters
Light Duty Base Plates
Light Duty Coupling Pin
Light Duty Locking Pin/Hair Pin
Light Duty Leveling Jack
Light Duty Socket Leveling Jack
Light Duty Outrigger
Scaffolding Planks
Lenght
Width
Weight
7ft.
19in.
27lbs.
7ft.
24in.
32lbs.
10ft.
19in.
47lbs.
10ft.
24in.
53lbs.
Laminated Scaffolding Planks
  • These are Laminated Veneer
    Scaffold Grade wooden planks.
    They are made from Douglas Fir
    and are lighter than other planks.
  • Made with a waterproof
    adhesive to insure strong
    bonding in extended wet
    conditions.
  • OSHA Stamp confirms
    conformance to applicable OSHA
    standards.
***All products should be used in
accordance with all Local, State
and Federal / OSHA requirements.
Carpenter's Wall Bracket
 
  • Made of tubular steel.
  • Bolts through up to 8" wall.
  • 5/8"- 11 x 11 threaded rod.
  • Weight: 11lbs.
  • Guardrails are required for
    platforms over 10ft. in height.
Side Wall Staging Bracket
 
  • Sturdy, steel constructed
    bracket bolts through walls
    with adjustment for wall
    thickness.
  • Supports a 36" platform
    constructed 0f 2" thick planks.
  • Holds two workers plus 75lbs.
    per 8ft. staging.
  • NO MORE THAN 8FT SPAN
    BETWEEN BRACKETS!
  • Folds for compact storage.
  • You must use guardrails when
    installed over 6ft. above
    ground.
Bracket Post
***All products should be used in
accordance with all Local, State
and Federal / OSHA requirements.
***All products should be used in accordance with all Local,
State and Federal / OSHA requirements.


**We carry a full line of parts for all our products.


****DELIVERY AVAILABLE****


***Please Note***
Due to limitations, all of our products cannot be featured on
this site. If you can't find something, PLEASE CALL!
PLEASE CALL FOR
THE LOWEST
PRICING AROUND!!!
800-303-3402
PLEASE CALL FOR
THE LOWEST
PRICING AROUND!!!
800-303-3402
PLEASE CALL FOR
THE LOWEST
PRICING AROUND!!!
800-303-3402
PLEASE CALL FOR
THE LOWEST
PRICING AROUND!!!
800-303-3402
PLEASE CALL FOR
THE LOWEST
PRICING AROUND!!!
800-303-3402
PLEASE CALL FOR
THE LOWEST
PRICING AROUND!!!
800-303-3402
PLEASE CALL FOR
THE LOWEST
PRICING AROUND!!!
800-303-3402
PLEASE CALL FOR
THE LOWEST
PRICING AROUND!!!
800-303-3402
PLEASE CALL FOR THE LOWEST PRICING AROUND!!!
800-303-3402
Counter
Chimney Bracket
Ultimate Ridgehooks
  • Ideal for use on all pitched roofs, even metal, slate and shake roofs.
  • Provides a solid base for securing roof or chimney brackets.
  • Ultimate Ridgehooks secure as much staging as needed - even off both sides of ridge -
    without ever having to penetrate the roof sheathing.
  • Set includes one complete pair of Ultimate Ridgehooks. All that is needed is enough 2" x
    8" framing lumber to sufficiently provide a nailing base for roof or chimney brackets.
Stairways
Model No.  SA21
BAKER SCAFFOLDING
6 Ft. Utility Scaffold
  • Heavy Duty All Steel Construction.
  • Durable powder coat paint finish.
  • 1,000 Lb. load capacity.
  • 1/2" deck with steel frame.
  • 5" dual locking swivel casters.
  • Assembled size: 6' L x 6' H x 29" W.
Utility Scaffold Accessories
Guard Rail Set
18" Outrigger
Aluminum Baker Scaffolding
  • Lightweight anodized aluminum.
  • Adjustable in 2" increments from 2'
    to 6'.
  • Rolls through 30" doorway.
  • 29" wide by 6' long.
  • 500 lb. maximum load rating.
  • Sturdy aluminum deck.
  • Cannot be stacked.
Tuf-Tower Scaffold
Ideally suited for dual-level
surfaces as illustrated on
stairways.
Outrigger
Tuf-Tower Guardrail
  • Angular steel legs.
  • Trusses have locking devices.
  • Adjustable in 3" increments.
  • Includes 5" heavy duty casters.
  • Aluminum edged platform board.
  • Rolls through 30" doorway.
  • 6ft H x 6ft L x 29in W.
  • 500 lb. maximum load rating
Gentex Heavy Duty Scaffolding
  • Heavier capacity.
  • Easier rolling
  • Hand-crafted quality.
  • Unitized MIG welded.
  • Quick assembly.
  • Fully adjustable.
  • Portable
  • Versatile
  • Maximum allowable load 750 lbs.
  1. 3ft. H x 6ft. L x 29in W
  2. 3ft. H x 6ft. L x 29in W
  3. 6ft. H x 6ft. L x 29in W
  4. 6ft. H x 8ft. L x 29in W